Laboratory hotplate PL-1818

Design features

The heating surface made of duralumin and the PID controller provide high accuracy and uniformity of the temperature of the plate surface heating.

The body of the plate is made of corrosion-resistant steel.

The design of the plate protects the body, electronic components and controls from spilling liquids onto the heating surface.

Operating features

Two modes of operation of the plate allow maintaining the temperature of the heating surface for a specified time or without time limit. The display shows both current and st heating parameters.

During the operation of the plate the user can change the time and/or heating temperature.

When the plate is turned off the settings of the last operating mode are saved.

For safety reasons the plate has a hot surface indicator that works even when the mains switch is turned off.

Specifications

Operating temperature range of the heating surface: from 40 to 400 ^��.

Instability of maintaining the set temperature: 5 ^��.

Two heating modes:

1) when controlling the temperature and heating time;

2) under temperature control.

Turning on the hot surface indicator with displaying the temperature of the heating surface: at a surface temperature of 60 ^��.

Power consumption of the plate: no more than 1.2 kW.

Dimensions:

heating surface: 180´180 mm;

plate: 195´205´122 mm.

Weight: 2.5 kg

The plate is powered from a 1-phase alternating current network with a voltage of (230ﾱ22) V and a frequency of (50ﾱ1) Hz.