Laboratory hotplate PLC-04
PLC-04 laboratory hotplate provides uniform heating with high accuracy of setting the heating temperature. Heating temperature and temperature maintenance time are set by the operator. The graphic display ensures informative control over the workflow.
Design features
PLC-04 plate has two heating sections which allows efficient use of the heating surface. Each heating section can work separately or together.
The PLC-02 plate has a graphical display that displays the current and set temperature of the heating surfaces, as well as the set time and time until the end of heating.
The heating surface made of duralumin and the PID controller provide high accuracy and uniformity of the temperature of the plate surface heating.
The body of the plate is made of corrosion-resistant steel.
The design of the plate protects the body, electronic components and controls from spilling liquids onto the heating surface.
Operating features
Two modes of operation of the plate allow maintaining the temperature of the heating surface for a specified time or without time limit. The display shows both current and st heating parameters.
During the operation of the plate the user can change the time and/or heating temperature.
When the plate is turned off the settings of the last operating mode are saved.
For safety purposes, the plate is equipped with:
- hot surface indicator able to work during the mains switch is off;
- the device of the thermal protection protecting a plate from an overheat.
Specifications
Operating temperature range of the heating surface: from 40 to 400 ��.
Instability of maintaining the set temperature: 3 ﾰC.
Maximum time to complete the heat treatment step: 599 minutes.
Power consumption of the plate: no more than 6000 W.
Dimensions:
plate: 576´484´153 mm;
"A" heating section: 284´440 mm;
"B" heating section: 284´440 mm;
Weight: no more than 15 kg.
Average service life: at least 3 years.
The plate is powered from a 3-phase alternating current network with a voltage of 230/400 V ﾱ10 % and a frequency of (50ﾱ2) Hz. Two phases are used, zero and ground conductor.