�-��� 8000

Analytical characteristics of X-MET 8000:

New, more powerful X-ray tube manufactured by OXFORD INSTRUMENTS;

Updated large area detector manufactured by OXFORD INSTRUMENTS;

High-precision analysis of light elements (Mg, Al, Si, P and S) thanks to the optimized detector-X-ray tube geometry and specialized analytical programs provides reliable and accurate analysis of aluminum, copper, magnesium and titanium and any other alloys;

High analysis speed (including light elements) 2-5 sec.;

Low limits of detection provide accurate analysis of impurity elements;

Analysis of objects of any shape and size: wire, foil, powder, shavings, welds. Ability to analyze metals on any basis, complex high-alloy alloys, special alloys, ferroalloys, precious metals, solders, ligatures, as well as plastics, ores, soils, slags.

Portability - X-MET 8000 just got smaller and more convenient:

Weight with battery does not exceed 1.5 kg.;

Convenience of transportation - the weight of the device in a shock-resistant case with the main accessories does not exceed 5 kg.;

Reduced body size with the same display size of 4.3 inches;

Updated narrowed nose design allows you to reach any hard-to-reach places, fillet welds and complex structures;

Close location of the infrared sample sensor to the measuring window provides an easy analysis of small objects (chip wires, etc.).

Reliability and industrial design:

IP54 (NEMA3) certified for dust and moisture protection;

Large modern color Blanview LCD display, 57x98 mm;

Enter the operating mode in 20 seconds after switching on;

Battery life: 10-12 hours, 16 hours standby;

High level of radiation safety;

Reinforced entrance window prevents damage to the detector (free option).

Narrow welds analysis.

Function of beam collimation up to 3 mm (option) in conjunction with a video camera (option) fixing the place of measurement, analysis of narrow welds is provided. Unlike adapters that physically reduce the measurement window the use of X-ray beam collimation provides more accurate analysis and the ability to analyze "light elements", such as Si.

Hot surface analysis.

Due to the fact that the nose of the X-MET 8000 analyzer is made of metal, it allows analyzing surfaces heated to a high temperature. The only limitation in this case are thin inlet windows that melt at temperatures above 100 C. Special HERO protective windows (optional) allow working with hot surfaces (up to 400 C) and do not limit analytical capabilities.

Convenient and simple operation, software:

Specialized professional software based on Linux is reliable and fast operation without failures and freeze ups;

Large display of GOST, AISI or DIN alloy grade Easy to add custom grades;

Large icons for easy management;

Ability to work with gloves;

Storage of all obtained results (16 GB for data storage);

Data transfer via USB connector without installing software and connecting to a computer;

Convenient for reports;

Ability to move the most important elements to the top of the screen;

Standard equipment:

Universal program for fundamental parameters for elements from Mg to Bi in the range from 0 to 100%;

Set of specialized empirical programs for the analysis of low-alloy, stainless, tool steels, copper, nickel, titanium, cobalt, aluminum alloys (the program is selected automatically);

Program for creating empirical programs according to customer samples - provides the ability to calibrate the analyzer by the user to solve non-standard problems.

Light stand for convenient and safe analysis of small samples;

Camera for fixing the place of analysis;

Lightweight charger, two rechargeable batteries;

Lightweight transport case;

Spare entrance windows (with or without reinforcement).